How to Install Artificial Hedge on Wood Fence
Wood fences offer a solid mounting surface but require more planning than chain-link. The key challenges are ensuring even coverage across solid panels and securing edges without visible hardware. While DIY is possible for simple installations, professional installers achieve seamless results using specialized mounting techniques.
What You'll Need
- Drill with wood screws or staple gun
- Measuring tape
- Level
- Ladder
- Work gloves
- Mounting brackets (optional)
Installation Process
Assess Your Fence Condition
Check for loose boards, rot, or structural issues. Hedge panels add wind load, so your fence should be in good condition. Address any repairs before installation.
Our professional installers assess structural integrity and can reinforce weak sections before installation.
Plan Your Layout
Measure your fence and plan panel placement. Unlike chain-link, you'll need to decide whether to mount directly to boards or use a frame system for easier attachment.
Professional installations often use custom frame systems that make future maintenance and panel replacement simple.
Prepare Mounting Points
For direct mounting, identify where fence rails or cross-supports are located behind the boards. These provide the strongest attachment points.
Attach Panels
Secure panels using staples, screws through backing grommets, or mounting brackets. Work from one end to maintain consistent alignment.
Our installers use hidden fastening systems that leave no visible hardware while ensuring panels stay secure in high winds.
Address Gaps and Edges
Wood fences often have gaps between boards. Panels may need trimming or overlapping to account for these irregularities.
Secure Top Edge
The top edge is most visible and most prone to wind lift. Ensure it's firmly attached along the entire length.
Professional finishing includes edge trim and weather sealing for a polished look that lasts.
Common Mistakes
- Not accounting for fence irregularities (warped boards, uneven heights)
- Using fasteners that rust and stain the wood
- Attaching only to fence boards instead of structural rails
- Leaving visible gaps at top and bottom edges
When to Hire a Pro
For best results on this type of installation, we recommend professional help. Here's when it's especially important:
- Older fences that may need reinforcement
- Installations requiring custom trimming around gates or corners
- When you want hidden hardware and a seamless finish
- Commercial properties where appearance is critical
- For warranty-backed installation with guaranteed results
Common Questions
No. Wood fences don't have mesh to thread zip ties through. You'll need screws, staples, or mounting brackets designed for solid surfaces.
Screws and staples create small holes. Professional installers minimize this with strategic placement and can use methods that leave your fence virtually untouched.
Standard board gaps are usually covered by panel overlap. Large gaps may require a backing panel or frame system, which professional installers can provide.
This is where professional installation really shines. Custom trimming and tiered mounting ensure even coverage despite irregular fence lines.
For most homeowners, yes. The complexity of wood fence installation means professional results are noticeably better, and you get warranty protection.
Ready to Start Your Project?
Let our professional installers handle the complexity while you enjoy the results.